IMPORTANT: Beginning October 1st, 2023, all individuals holding at least one certification will be required to complete ONE of the Standards Overview courses below for their renewal that corresponds with their certification. This means that if you hold multiple certifications, then you will need to choose one of these courses for EACH certification renewal. This 4-hour course will be applied towards your total number of CEs needed for each certification. Once completed, please upload the course certificate from your the training provider to your NRPP certification portal just as you would your other CEs.
As a reminder, the NRPP certification program is now ANAB accredited, which adds an extra layer of credibility to your certification(s). Therefore, as a certified professional representing NRPP, it is important that you comprehend and comply with ANSI/AARST national radon standards. These courses will help you gain understanding and stay up to date with industry best practices.
Classroom Based Courses
Radon Measurement Standards Overview Course
Course ID#: KSU-1000
Applicable to: Measurement
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: This four-hour course provides an overview of the ANSI-AARST Standards consortium and the process by which standards are developed and updated. It will review all current standards and share how to access them and the resources available to the public and industry. The status of current public review will be presented for each standard currently undergoing harmonization or revision, along with how to comment in that process. The course will close with a review of the most important measurement standards and how to comply with the current guidance and requirements.
Provided by Kansas State University (MURC-KSU), Manhattan, KS, Phone: (785) 532-4992, Email: bsnead@ksu.edu
Website: http://www.radoncourses.com
ANSI/AARST MAH Mandatory Standard Overview
Course ID#: SPRUCE-905
Applicable to: Measurement
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing MAH Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com
Web Based Courses
C-4-116 ANSI/AARST Measurement Mandatory Standards Review
Course ID#: CERTI-1000
Applicable to: Measurement
Course Type: Home Study,Online
C.E. Credits: 4
Course Description: Mandatory Standards Update course for all renewals after October 1st, 2023.
As of 2023, the National Radon Proficiency Program amended its policy regarding the renewal of its base radon measurement and mitigation certifications to require a four-hour review of the ANSI/AARST standards relevant to a specific certification. This course provides that review via a series of quiz questions with detailed explanations and citation of relevant sections of the standards.
To complete this course students access the ANSI/AARST standard, familiarize themselves with the standard and complete the validation quizzes consisting of 80 questions.
Provided by Center for Environmental Research & Technology, Inc. (CERTI), Flemington, NJ 08822, Phone: (800) 513-8332, Email: jfisher@certi.us
Website: http://www.certi.us
Review of Current ANSI-AARST MAH & MS-QA Standards
Course ID#: ECOS-1000
Applicable to: Measurement
Course Type: Online
C.E. Credits: 4
Course Description: Mandatory Standards Update course for all renewals after October 1st, 2023.
This course is a required review of the current MAH & MS-QA standards.
Provided by Ecosense, 1460 Maria Way, San Jose, CA 95117, Phone: (678) 983-9312, Email: djones@ecosense.io
Website: https://learningcenter.ecosense.io/
Radon Measurement Standards Overview Course
Course ID#: KSU-1000
Applicable to: Measurement
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: This four-hour course provides an overview of the ANSI-AARST Standards consortium and the process by which standards are developed and updated. It will review all current standards and share how to access them and the resources available to the public and industry. The status of current public review will be presented for each standard currently undergoing harmonization or revision, along with how to comment in that process. The course will close with a review of the most important measurement standards and how to comply with the current guidance and requirements.
Provided by Kansas State University (MURC-KSU), Manhattan, KS, Phone: (785) 532-4992, Email: bsnead@ksu.edu
Website: http://www.radoncourses.com
Radon Measurement Professional Review
Course ID#: NORAD-5001
Applicable to: Measurement & Mitigation
Course Type: Online
C.E. Credits: 16
Course Description: 16 Credit Hour Continuing Education Course (CE) approved by NRPP. Its objective is to provide currently certified Radon Measurement Professionals a thorough review of the ANSI/AARST MAH 2023 and MS-QA 2023 Standards currently required by NRPP and update Certified Radon Measurement Professionals who may have been certified prior to the implementation of the new requirements and/or need a review of them.
Provided by Norad Corp., Gaithersburg, MD 20877, Phone: (301) 468-6666, Email: pmerolla@envirolabs-inc.com
Website: https://norad.training/course/course-one-4-2/
ANSI/AARST MAH Mandatory Standard Overview
Course ID#: SPRUCE-905
Applicable to: Measurement
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing MAH Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com
Home Study Courses
C-4-116 ANSI/AARST Measurement Mandatory Standards Review
Course ID#: CERTI-1000
Applicable to: Measurement
Course Type: Home Study,Online
C.E. Credits: 4
Course Description: Mandatory Standards Update course for all renewals after October 1st, 2023.
As of 2023, the National Radon Proficiency Program amended its policy regarding the renewal of its base radon measurement and mitigation certifications to require a four-hour review of the ANSI/AARST standards relevant to a specific certification. This course provides that review via a series of quiz questions with detailed explanations and citation of relevant sections of the standards.
To complete this course students access the ANSI/AARST standard, familiarize themselves with the standard and complete the validation quizzes consisting of 80 questions.
Provided by Center for Environmental Research & Technology, Inc. (CERTI), Flemington, NJ 08822, Phone: (800) 513-8332, Email: jfisher@certi.us
Website: http://www.certi.us
ANSI/AARST MAH Mandatory Standard Overview
Course ID#: SPRUCE-905
Applicable to: Measurement
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing MAH Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com
Classroom Based Courses
C-4-117: ANSI/AARST Mitigation Standards Review
Course ID#: CERTI-4001
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: As of 2023, the National Radon Proficiency Program amended its policy regarding the renewal of its base radon measurement and mitigation certifications to require a four-hour review of the ANSI/AARST standards relevant to a specific certification. This course provides that review via a series of quiz questions with detailed explanations and citation of relevant sections of the standards.
To complete this course, students must access the ANSI/AARST standard, familiarize themselves with the standard and complete the validation quizzes consisting of 80 questions. The course is offered Online, or via Home Study, Classroom, or Webinar.
Provided by Center for Environmental Research & Technology, Inc. (CERTI), Flemington, NJ 08822, Phone: (800) 513-8332, Email: jfisher@certi.us
Website: http://www.certi.us
Review of Current ANSI-AARST SGM-SF Mitigation Standards
Course ID#: ECOS-1001
Applicable to: Mitigation
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: Mandatory Standards Update course for all renewals after October 1st, 2023.
This course is a required review of the current SGM-SF Standard.
Provided by Ecosense, 1460 Maria Way, San Jose, CA 95117, Phone: (678) 983-9312, Email: djones@ecosense.io
Website: https://learningcenter.ecosense.io/
Radon Mitigation Standards Overview Course
Course ID#: KSU-1500
Applicable to: Mitigation
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: This four-hour course provides an overview of the ANSI-AARST Standards consortium and the process by which standards are developed and updated. It will review all current standards and share how to access them and the resources available to the public and industry. The status of current public review will be presented for each standard currently undergoing harmonization or revision, along with how to comment in that process. The course will close with a review of the most important mitigation standards and how to comply with the current guidance and requirements.
Provided by Kansas State University (MURC-KSU), Manhattan, KS, Phone: (785) 532-4992, Email: bsnead@ksu.edu
Website: http://www.radoncourses.com
ANSI/AARST SGM Mandatory Standard Overview
Course ID#: SPRUCE-904
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing SGM Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com
Web Based Courses
C-4-117: ANSI/AARST Mitigation Standards Review
Course ID#: CERTI-4001
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: As of 2023, the National Radon Proficiency Program amended its policy regarding the renewal of its base radon measurement and mitigation certifications to require a four-hour review of the ANSI/AARST standards relevant to a specific certification. This course provides that review via a series of quiz questions with detailed explanations and citation of relevant sections of the standards.
To complete this course, students must access the ANSI/AARST standard, familiarize themselves with the standard and complete the validation quizzes consisting of 80 questions. The course is offered Online, or via Home Study, Classroom, or Webinar.
Provided by Center for Environmental Research & Technology, Inc. (CERTI), Flemington, NJ 08822, Phone: (800) 513-8332, Email: jfisher@certi.us
Website: http://www.certi.us
Review of Current ANSI-AARST SGM-SF Mitigation Standards
Course ID#: ECOS-1001
Applicable to: Mitigation
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: Mandatory Standards Update course for all renewals after October 1st, 2023.
This course is a required review of the current SGM-SF Standard.
Provided by Ecosense, 1460 Maria Way, San Jose, CA 95117, Phone: (678) 983-9312, Email: djones@ecosense.io
Website: https://learningcenter.ecosense.io/
Radon Mitigation Standards Overview Course
Course ID#: KSU-1500
Applicable to: Mitigation
Course Type: Classroom,Online
C.E. Credits: 4
Course Description: This four-hour course provides an overview of the ANSI-AARST Standards consortium and the process by which standards are developed and updated. It will review all current standards and share how to access them and the resources available to the public and industry. The status of current public review will be presented for each standard currently undergoing harmonization or revision, along with how to comment in that process. The course will close with a review of the most important mitigation standards and how to comply with the current guidance and requirements.
Provided by Kansas State University (MURC-KSU), Manhattan, KS, Phone: (785) 532-4992, Email: bsnead@ksu.edu
Website: http://www.radoncourses.com
Radon Measurement Professional Review
Course ID#: NORAD-5001
Applicable to: Measurement & Mitigation
Course Type: Online
C.E. Credits: 16
Course Description: 16 Credit Hour Continuing Education Course (CE) approved by NRPP. Its objective is to provide currently certified Radon Measurement Professionals a thorough review of the ANSI/AARST MAH 2023 and MS-QA 2023 Standards currently required by NRPP and update Certified Radon Measurement Professionals who may have been certified prior to the implementation of the new requirements and/or need a review of them.
Provided by Norad Corp., Gaithersburg, MD 20877, Phone: (301) 468-6666, Email: pmerolla@envirolabs-inc.com
Website: https://norad.training/course/course-one-4-2/
ANSI/AARST SGM Mandatory Standard Overview
Course ID#: SPRUCE-904
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing SGM Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com
Home Study Courses
C-4-117: ANSI/AARST Mitigation Standards Review
Course ID#: CERTI-4001
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: As of 2023, the National Radon Proficiency Program amended its policy regarding the renewal of its base radon measurement and mitigation certifications to require a four-hour review of the ANSI/AARST standards relevant to a specific certification. This course provides that review via a series of quiz questions with detailed explanations and citation of relevant sections of the standards.
To complete this course, students must access the ANSI/AARST standard, familiarize themselves with the standard and complete the validation quizzes consisting of 80 questions. The course is offered Online, or via Home Study, Classroom, or Webinar.
Provided by Center for Environmental Research & Technology, Inc. (CERTI), Flemington, NJ 08822, Phone: (800) 513-8332, Email: jfisher@certi.us
Website: http://www.certi.us
ANSI/AARST SGM Mandatory Standard Overview
Course ID#: SPRUCE-904
Applicable to: Mitigation
Course Type: Classroom,Online,Home Study
C.E. Credits: 4
Course Description: Because the updated ANSI-AARST measurement and mitigation standards are ongoing, this course is mandatory. All certified individuals renewing after October 1, 2023 will need to have taken the appropriate course. This requirement will be an ongoing requirement each renewal cycle and courses will need to be updated as standards updates occur.
The course will cover changes to the existing SGM Standard as well as a review of current rules and regulations.
Provided by Spruce Environmental Technologies, Inc., Ward Hill, MA, Phone: (800) 355-0901, Email: training@spruce.com
Website: https://sprucetraining.talentlms.com